The Stealth Acoustics model LR6G is a 2-way, full-range speaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.

The Stealth Acoustics model LR6G is a 2-way, full-range speaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bo

Stealth Acoustics LRg Series 6.5" Invisible In Wall or In Ceiling Speaker

The Stealth Acoustics LR6G incorporates an acoustically coupled, high-power 6.5” cone woofer and a direct coupled 30 mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow for smooth frequency extension to 20kHz. When the LR6G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45Hz can be achieved. The LR6G contains two independent protection circuits (high-frequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.

The LR6G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

Best for in-wall or in-ceiling installations

The Stealth Acoustics model LR8G is a two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.

The Stealth Acoustics model LR8G is a two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Speaker

The LR8G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

The Stealth Acoustics LR8G incorporates an acoustically coupled high quality, high-power 8” cone woofer and a direct coupled 25 mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow for smooth frequency extension to 20 kHz. When the LR8G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 40 Hz can be achieved. The LR8G contains two independent protection circuits (high-frequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.

Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard.

The Stealth Acoustics model SLR8G is a dual channel, full-range speaker system that is most popularly used with dispersed audio systems since it can play both stereo channels as a single panel. The SLR8G has a rigid frame that attaches directly to standard structural framing becomes completely invisible after installation.

The Stealth Acoustics model SLR8G is a dual channel, full-range speaker system that is most popularly used with dispersed audio systems since it can play both stereo channels as a single panel. The SLR8G has a rigid frame that attaches directly to standar

The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.

The SLR8G incorporates an acoustically coupled high quality, high-power 8” cone woofer and two directly coupled 25 mm neo-magnet high-frequency motors. Advanced internal carbon fiber materials allow for smooth frequency extension to 20 kHz. When the SLR8G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45 Hz can be achieved. The SLR8G contains independent crossover sections and protection circuits (high-frequency and low-frequency sections) for each channel that automatically reset upon reduction of excessive amplifier power.  This robust speaker is designed to last as long as your home does.

The SLR8G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

The Stealth Acoustics Model B30G is a two-panel monaural subwoofer speaker system that becomes completely invisible after installation. Ideal for any surround sound, foreground music or whole-house audio system that needs extra bass output, each B30G panel incorporates two acoustically coupled, high-quality, high-power 8” (203 mm) cone woofers.

The Stealth Acoustics Model B30G is a two-panel monaural subwoofer speaker system that becomes completely invisible after installation. Ideal for any surround sound, foreground music or whole-house audio system that needs extra bass output, each B30G pane

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Subwoofer Pair

B30G panels may be mounted separately or stacked to achieve desired acoustical results.

Stealth Acoustics recommends the companion Model SA255 250-watt subwoofer amplifier/crossover as a matched amplifier for the B30G subwoofer speakers. Stealth Acoustics also offers a line of full-range speaker panels that when combined with the B30G, deliver a complete, totally invisible audio solution.

The B30G has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.  It may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods may be supported using special techniques.

The Stealth Acoustics model B22G is a compact, two-panel monaural subwoofer speaker system that becomes completely invisible after installation. The subwoofer has a heavy duty rigid frame that attaches directly to standard structural framing.

The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.  Each panel incorporates an acoustically coupled, high-quality, high-power 8” (203 mm) cone woofer.

Stealth Acoustics recommends the companion Model SA255 250-watt subwoofer amplifier/crossover as a matched amplifier for the B22G subwoofer speakers. Stealth Acoustics also offers a line of full-range speaker panels that when combined with the B22G, deliver a complete, totally invisible audio solution.

The B22G may be installed in either the wall or ceiling.  It can be finished on site with latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

Background Distributed Audio, designed for use with the LR6g for extra impact in critical listening zones

Best for in-wall or in-ceiling installations.

The model LRX-85 invisible speaker is a premium, 3-way, two panel system. The LRX-85 is truly a powerful and complete full-range solution, requiring no special bass-limiting filters, ancillary protection circuits or external subwoofers. For even greater ability, an active, bi-amplified.

The model LRX-85 invisible speaker is a premium, 3-way, two panel system. The LRX-85 is truly a powerful and complete full-range solution, requiring no special bass-limiting filters, ancillary protection circuits or external subwoofers. For even greater a

Stealth Acoustics LRX Series 8" 2 Panel Invisible In Wall or In Ceiling Speaker System

300watt power handling enables output up to 105dB with premium extended range sound quality. The LRX-85 performs as an exemplary invisible speaker in a wide range of applications, including home theaters, high-impact distributed audio and critical listening environments where aesthetic needs demand no visible presence of a loudspeaker.

The LRX85 utilizes separate, easy to install, flat front panels for mid-high and bass reproduction, improving performance while minimizing intermodulation distortion. The two panels may be mounted as far a 1meter apart and still provide quality outcomes.

The mid-high panel incorporates four 25watt neodymium midrange motors and one 25watt neodymium high-frequency motor aligned in Stealth’s Quad-Balanced Midrange Drive™ configuration. Advanced internal materials and smooth sounding FidelityGlass™ panel face allow for upper frequency response to 20 kHz. A multi-stage passive crossover is provided to allow a single speaker line from the amplifier to feed both mid-high and bass panels. The LRX-85 crossover contains three independent self-resetting protection circuits to protect the speaker from excessive amplifier power, ensuring maximum long-term reliability.

The separate dual 8” high-power cone woofer bass-stage panel provides extended bass response down to 35Hz when the panel is installed in a recommended back box and properly tuned. The result is an impressive sounding loudspeaker rivaling visible alternatives.

Stealth Acoustics’ invisibility offers a powerful advantage over traditional loudspeakers because they can be placed wherever they sound best, free of visual concerns that may conflict with architectural features. The LRX-85 is designed to be installed into standard wall or ceiling constructions with many on-site finishing options that include paint, light wallpaper, fabrics, wood veneers, vinyl graphics and selected texture coats. There is no need for non-standard wallboard finishing materials. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard. Unique mounting and advanced finishing methods may be accomplished using special techniques.

The Stealth Acoustics model LRX-83 is a three-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing.

Stealth Acoustics LRX Series 8" Invisible In Wall or In Ceiling Speaker

The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard.

The LRX-83 may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for nonstandard wallboard finishing materials. Advanced finishing methods such as veneer treatments may be supported using special techniques.

The Stealth Acoustics LRX-83 incorporates an acoustically coupled high quality low profile, high-power 8” cone woofer, a 30mm direct coupled neo-magnet mid-range driver and a direct coupled 25 mm neo-magnet high-frequency driver. Advanced internal materials allow for smooth frequency extension to 20 kHz. When the LRX-83 is installed in the recommended back-box, frequency response below 40 Hz can be achieved. The LRX-83 contains two independent protection circuits (high/mid-frequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.

The StingRay 6 is the smallest member of the Stingray Family. At only 15” wide and less than 4” in depth the StingRay 6 provides warm natural bass and mids with crisp highs for a broad coverage pattern.

Stealth Acoustics StingRay 6.5" 2-Way Outdoor Speaker

Stealth Acoustics StingRay 6.5" Matte Black 2-Way Outdoor Speaker

Like the larger StingRay 8, the Stingray 6 utilizes Stealth’s proprietary FidelityGlass™ solid-front radiating surface, which ensures the StingRay’s internal components are fully isolated from any intrusion of dust or moisture.  The StingRay has an unprecedented environmental protection rating of IP-68 as measured to IEC standards. StingRay is rated to be fully operable underwater for up to 64 hours at 1M depth and can withstand rain, snow, sleet, hail, sun and dust in temperatures ranging from 0 – 150 degrees F.

Stealth Acoustics StingRay 6.5" Matte White 2-Way Outdoor Speaker

Stealth’s StingRay 8 environmental outdoor speaker is completely hermetically sealed and fully immune to the elements, including rain, snow, ice or particulates. There are no grills, no openings, allowing it to even operate underwater.

Stealth Acoustics StingRay 8" 2-Way Outdoor Speaker

Stealth Acoustics StingRay 8" Matte Black 2-Way Outdoor Speaker

The StingRay 8 and has an Ingress Protection rating (IEC IP rating) of IP-68, meaning it exceeds the top standard IP rating (IP-67) and has been certified for a minimum of 64 hours underwater at 1 meter depth.  Its no wonder that the StingRay has become a key audio system speaker in some of the worlds most impressive Yachts.

StingRay is an 8” 2-way speaker using a hybrid of traditional and cutting-edge speaker technologies. The internal drivers are an 8” high-power cone woofer and a 30mm 25W neodymium directly coupled tweeter.  Together, they energize the speaker’s unique FidelityGlass™ solid-front radiating surface to create a surprising bass response and a smooth hi-frequency output.

The impact resistant and highly durable StingRay 8 reproduces sounds from 45Hz to 18kHz, radiating all sounds equally in a near hemispherical pattern.  An ASA marine-grade enclosure makes Stingray stable and fully-operable from 0 to 150F degrees. With output up to 103dB, StingRay is perfect for outdoor music, outdoor theater, program or paging applications.

Stealth Acoustics StingRay 8" Matte White 2-Way Outdoor Speaker

Stealth’s StingRay 83 environmental outdoor speaker is completely hermetically sealed and fully immune to the elements, including rain, snow, ice or particulates. There are no grills, no openings, allowing it to even operate underwater.

Stealth Acoustics StingRay 8" Matte Black 3-Way Outdoor Speaker

The StingRay 83 and has an Ingress Protection rating (IEC IP rating) of IP-68, meaning it exceeds the top standard IP rating (IP-67) and has been certified for a minimum of 64 hours underwater at 1 meter depth.  Its no wonder that the StingRay has become a key audio system speaker in some of the worlds most impressive Yachts.

StingRay 83 is an 8” 3-way speaker using a hybrid of traditional and cutting-edge speaker technologies. The internal drivers are an 8” high-power cone woofer, a 30mm direct coupled neo-magnet mid-range driver and a direct coupled 25 mm neo-magnet high-frequency driver.  Together, they energize the speaker’s unique FidelityGlass™ solid-front radiating surface to create a surprising bass response and a smooth hi-frequency output.

The impact resistant and highly durable StingRay 83 reproduces sounds from 45Hz to 18kHz, radiating all sounds equally in a near hemispherical pattern.  An ASA marine-grade enclosure makes Stingray stable and fully-operable from 0 to 150F degrees. With output up to 103dB, StingRay is perfect for outdoor music, outdoor theater, program or paging applications.

The Stealth Acoustics StingRay 430™ is a monaural environmentally protected outdoor subwoofer speaker system, offering a powerful advantage over traditional outdoor subwoofers. Rated at IP-66, the StingRay 430™ does not allow dust or moisture to enter the device, making it perfect for any outdoor application where wide coverage, low frequency sound and environmental durability are required.

The Stealth Acoustics StingRay 430™ is a monaural environmentally protected outdoor subwoofer speaker system, offering a powerful advantage over traditional outdoor subwoofers. Rated at IP-66, the StingRay 430™ does not allow dust or moisture to enter the

Stealth Acoustics StingRay 8" Outdoor Subwoofer

Stealth Acoustics StingRay 8" Matte Black Outdoor Subwoofer

The StingRay 430™ incorporates a total of 8 acoustically coupled, high-power, 8″ (203 mm) cone woofers and a passive radiator. Using acoustic lever principals, the StingRay 430™ provides exceptional bass output from 20Hz to 100Hz by trading off excursion for surface area to propagate bass waveforms. Each of the 4 sides of the speaker has 331 sq. in. (840 sq. cm) of active area for a total of 1324 sq. in. (3360 sq. cm)

The StingRay 430™ is offered in a variety of styles. Stock finishes include matte black or matte white but can also be special ordered in sand, or gray stone textured finishes or custom painted to match any décor. To offer a completely unique finish option, select the Image Wrap version and elect to have an actual photograph of the speaker’s surroundings or even artwork laminated directly to the face of the speaker.

Stealth Acoustics StingRay 8" Matte White Outdoor Subwoofer

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

<avb-header-after>  <avb-designer-block data-id="27" class="avb-grid avb-typography dsg-block-27-header-after"> <div class="avb-grid__column avb-grid__column--small-12 dsg-block-27__no-padding dsg-block-27-header-after__headline"> <avb-link is="a" class="dsg-block-27-header-after__content" data-href="https://www.drapinskitv.com/financing"> <span class="dsg-block-27-header-after--bold">12 Month No Interest Financing. </span> | LEARN&nbsp;MORE &raquo; </avb-link> </div> </avb-designer-block> </avb-header-after>  <style> @import url('https://fonts.googleapis.com/css?family=Montserrat:300,500,700&display=swap'); /* ==================== Header-after (block-27-header-after) ==================== */ .dsg-block-27__no-padding { padding: 0; } .dsg-block-27-header-after__headline { padding: 0.5rem; text-align: center; color: white; font-weight: 100; background-color: #800000; margin-bottom: 0; color: #fff; font-weight: 100; font-size: 20px; margin-top: .1rem; letter-spacing: 1px; font-family: 'Montserrat', sans-serif; } .dsg-block-mobile { display: block; } .dsg-block-display { display: none; } .dsg-block-27-underline { color: #cc0000 !important; } .dsg-block-27-header-after__content, .dsg-block-27-header-after__content:visited, .dsg-block-27-header-after__content:focus { color: white; font-weight: 100; font-size: 20px; } .dsg-block-27-header-after__content:hover { color: white; } .dsg-block-27-header-after--bold { font-weight: 700; } @media screen and (min-width: 600px) { .dsg-block-mobile { display: none; } .dsg-block-display { display: inline; } .dsg-block-27-header-after__content, .dsg-block-27-header-after__content:visited, .dsg-block-27-header-after__content:focus { display: inline; } } @media screen and (min-width: 960px) {} @media screen and (min-width: 1280px) {} @media screen and (min-width: 1600px) {} </style>

Default Header After Global Promotions

Stealth Acoustics

Stealth Acoustics LRg Series 6.5" Invisible In Wall or In Ceiling Speaker

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Speaker

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Speaker

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Subwoofer Pair

Stealth Acoustics LRg Series 8" Invisible In Wall or In Ceiling Subwoofer Pair

Stealth Acoustics LRX Series 8" 2 Panel Invisible In Wall or In Ceiling Speaker System

Stealth Acoustics LRX Series 8" Invisible In Wall or In Ceiling Speaker

Stealth Acoustics StingRay 6.5" Matte Black 2-Way Outdoor Speaker

Stealth Acoustics StingRay 8" Matte Black 2-Way Outdoor Speaker

Stealth Acoustics StingRay 8" Matte Black 3-Way Outdoor Speaker

Stealth Acoustics StingRay 8" Matte Black Outdoor Subwoofer

Is it Time to Plan Your Next Great Project? Great projects start with great plans! Let our team of experts find the right solutions to meet all your needs, for projects from residential to commercial. Send us your details below, and one of our friendly and knowledgeable professionals will reach out.

SOLUTIONS

INFO

STORE INFO